# Jakom: Specialist in het vervaardigen van assen en walsen

> Jakom, dé gepassioneerde én gespecialiseerde assen\- en walsenproducent\. Van groot tot klein en van nationaal tot internationaal\.

Generated by Yoast SEO v28.4, this is an llms.txt file, meant for consumption by LLMs.

## Pagina's
- [Blogs](https://www.jakom.nl/blogs/)
- [Blogs](https://www.jakom.nl/blogs/)
- [Über Uns](https://www.jakom.nl/ueber-uns/)
- [About Us](https://www.jakom.nl/about-us/)
- [Over ons](https://www.jakom.nl/over-ons/)

## Berichten
- [How to choose a metal rolling machine for heavy\-duty production](https://www.jakom.nl/blog/how-to-choose-a-metal-rolling-machine-for-heavy-duty-production/): Choosing a metal rolling machine for heavyduty production is not only a capacity question\. A brochure may say a machine can roll a certain thickness, width or profile, but the real test starts when th
- [How sleeve machining prevents fit, wear and alignment problems](https://www.jakom.nl/blog/how-sleeve-machining-prevents-fit-wear-and-alignment-problems/): A sleeve may look like a simple cylindrical part, but in a critical assembly it often decides whether the surrounding components fit correctly, run concentrically and survive under load\. Poor sleeve m
- [How spline shafts maintain fit under heavy torque](https://www.jakom.nl/blog/how-spline-shafts-maintain-fit-under-heavy-torque/): Heavy torque does not usually destroy a spline shaft in one clean moment\. More often, the first problem is loss of fit\. The splined connection starts to fret, backlash increases, contact shifts toward
- [How shaft straightening affects precision and service life](https://www.jakom.nl/blog/how-shaft-straightening-affects-precision-and-service-life/): Shaft straightening is sometimes treated as a repair step at the end of a job\. In critical industrial applications, that view is too simple\. Straightening affects how a shaft runs, how loads are trans
- [How complex machined parts reduce risk in critical assemblies](https://www.jakom.nl/blog/how-complex-machined-parts-reduce-risk-in-critical-assemblies/): In a critical assembly, the cost of a bad component is rarely limited to the component itself\. A shaft that runs out of line can damage bearings and seals\. A roller with the wrong surface behavior can

## Categorieën
- [Blog NL](https://www.jakom.nl/category/blog/)

## Optional
- [Sitemap index](https://www.jakom.nl/sitemap_index.xml)